If after a power outage, your CP-100 gateway shows the message: 'FAT: Drive Mounting Error. It appears the SD Micro drive is not present. Please reboot.'
1. Power the gateway, and hit the RESET_B on the back, this is a white button, use a thin straw or pencil, or any non-conducting probe to press it.
2. If step 1 does not result in the gateway completing it's boot sequence, then remove / replace the card, and repeat 1 above
-- To remove the card locate the microSD card slot on the right hand side of the gateway, push the card in to unlock it, then pull to remove, thin tweezers will be required.